uPVC Door Locks Repairs
Doors that are jammed or stiff are not only frustrating but they also present a security risk. It is recommended to contact an expert locksmith as soon as you can. They'll be able to solve your problem and keep your home secure.
Repairs to door locks made of upvc can be quite fiddly and should only be done by a professional locksmith. There are many different problems that can occur with the lock mechanism. here are a few of the most common:
Sticking and misalignment
If you have a uPVC door that does not lock correctly can be a hassle and can also compromise the security of your home. This issue could be caused by weather changes or simply due to regular wear and wear and tear. It is essential to address this issue quickly to avoid having the issue get worse and make it more difficult for you to get your door open.
Lubrication: The wheels and hooks inside the locking mechanism may become stiff if they aren't properly lubricated. The use of graphite or silicone spray can help ease the motions and ensure that the mechanism is operating smoothly. It is essential to not use oil-based lubricants however, as they attract dirt and create further issues over time. After applying the lubricant to the lock, insert the key and move the handle up and downward several times. This will spread the lubricant throughout.
Weather Conditions - Changes in temperature can cause the uPVC to expand and contract which can disrupt the alignment of the lock mechanism. This can be corrected by altering the hinges on the frame and door to move them back to acceptable tolerances. It is recommended to leave this task to a professional, as it can be difficult and dangerous to do correctly without causing damage to the frame or door.
Loose Lock Cylinder - Over time the screw that secures the cylinder can loosen and cause the cylinder to wobble when the handle or key is turned. This can be fixed by tightening the screw that holds the cylinder but this isn't always the best option for all doors because it requires access to the top of the door frame, and may not be possible with bifold or french doors.
It is important to note that if the issue continues to persist even after a few attempts to resolve it, it's likely that there is an issue with the mechanism and is best to have it replaced by a locksmith. upvc door repairs near me can help you choose the most suitable replacement uPVC doors and ensure that they are securely installed. They can also provide advice regarding security upgrades and recommend high-quality locks that will be in compliance with the most recent security standards.
Damaged Cylinder
There are a variety of reasons the door handle doesn't lift or lock. One of the most common is that there is an issue with the multipoint locking mechanism. This mechanism isn't just present on uPVC doors but also in wood composites and some windows made of aluminium. Luckily, this isn't an issue and can often be solved by simply changing it.
If the cylinder is damaged, it's going to need to be replaced. This is typically an easy task for a locksmith and can be completed at a reasonable cost. If the damage is significant it could be more cost-effective to replace the entire lock rather than just the cylinder.
It is common to have to change locks, whether it is for security reasons or because you've moved house. Many reputable locksmiths carry a wide range of locks that are compatible with uPVC door and can install them quickly and effectively. Additionally locksmiths can offer advice on the most secure options for your property and give any advice you need.
It is not uncommon for the components inside the lock to break and this can make it very difficult for keys to turn. A locksmith can easily solve this issue. They will inspect the lock to identify the issue and then fix or replace it.
A top-quality uPVC is a fantastic way to secure your home, especially if it's fitted with a lock that is anti-snap. There are also some low-quality uPVC doors available which offer very little security and in fact can be made to open by an intruder who is determined to break in. In these instances it is definitely worth having an expert locksmith visit and change your locks in order to increase the security for your home.
It is crucial to contact a locksmith out immediately if you notice problems with your uPVC doors so they can repair the issue before it gets any more serious. There are many problems that can cause a uPVC door to stop working correctly, and trying to fix them yourself can cause problem even worse.
Handle Damage
If a handle isn't functioning properly, it could be due to damage caused by an attempt to break or wear and tear. If this is the situation the replacement will be needed. But, before calling locksmiths to repair the handle, you should determine the cause of the damage. The first thing to consider is that the door might be smashed or struck by vehicles. If this is the case, then the damage to the handle may not be as bad as it seems and could even be repaired.
Another reason for the issue could be that the lock mechanism failed. Usually, this results in some floppiness or crunchiness when trying to push the handle down. If you are unable to push the handle down, then it's likely the gearbox has failed and locksmiths will have to replace this component of the multi-point lock.
A damaged or broken door mechanism can be very frustrating because it could compromise the security of your home. If you suspect this is the case, it's worth calling a locksmith right now. They can either do an interim repair while they wait for replacement parts, or they can replace the entire lock.
It is essential to take care of your doors and locks in order to avoid future problems. Regular cleaning and maintenance will help to ensure that the lock is in good condition and free from dirt and other obstructions. This will also prolong the life of the lock and ensure that it continues work properly.
Keeping your doors, windows and other locking systems in good in good working order is vital to ensure the safety of your family and possessions. Find a locksmith that is experienced in upvc or composite door locks to resolve any problems. You can locate local locksmiths using our search tool above. They are all fully insured, qualified and experienced so you can be confident that your property and belongings are safe with them.
Damaged Lock
If the lock has been damaged in any way, it will have to be replaced. This is often much cheaper than replacing the entire door. A badly damaged lock can be opened in many ways. A professional locksmith will inspect the lock to determine if it can be repaired or should a replacement be required.
UPVC and composite doors are fitted with multi-point locking mechanisms which use several bolts to secure the door. They are therefore resistant to burglary when properly maintained and kept in good working order. They do wear out with time. If you notice that your lock is struggling to turn the handle or won't close and lock, it is a clear sign that it's time to replace it.
The most common cause of this is because a cylinder or the locking mechanism itself has been damaged. This is more likely if you have had the locks fitted as part of the construction of a new home than an older property, but can be caused by general wear and tear. To ensure your home's security, it is recommended that you swap your euro cylinder with an anti-snap cylinder as soon as you spot any indications.
The door handle may also have trouble lifting when the upvc is closed and locked. It could also not even lift even if it is locked. This is typically a sign that the gearbox (the central mechanism that keeps the handle horizontal to the door) has failed. This can be replaced by locksmiths who will allow you to use the handle again.
As with all mechanical devices a upvc door lock is prone to wear and tear. It can also be affected by external pressures which can cause it become disaligned. You will need to call a professional locksmith if this happens to ensure they can open the lock without causing damage to the frame, or the door.